Mach 10 Fuselage hard surface cleaner.
Directions: A dilution ratio of one part Mach 10 to forty parts water is recommended although depending on the level of soilage higher dilution rates can be used. For optimum cleaning foam spray the entire fuselage from bottom up and leave for approximately five minutes. Then pressure rinse from bottom up with the water blaster A final rinse is recommended from the top to the bottom.
For manual cleaning a dilution ratio of one part Mach 10 to 80 parts water is recommended. Apply with brush and cover small areas at a time, rinse off thoroughly with a strong jet of water. Do not let dry on surface.
 
 
Precautions:
Mach 10 is a very  Efficient, biodegradable and efficient cleaner however it is advised to always wear applicable safety gear when handling any concentrated cleaner. It will still dry your skin and leave you 
susceptible to dermatitis.